Publications

For effective operation, Simultaneous Transmit and Receive (STAR) systems require high isolation between the transmitted signals and the receiver input, the absence of which can lead to the saturation of a receiver's front end. This paper presents an adaptive RF canceller used to improve isolation. The canceller is configured as...

A novel system is described for precision indoor location and tracking of personnel inside a building using RF signals exchanged with reference units deployed outside the building without benefit of infrastructure or site survey. Localization in high multipath without multilateration by fusion of unidirectional signals using singular array reconciliation tomography...

A superstrate-enhanced substrate-loaded array (SESLA) with an integrated feed is presented. The design allows for a practical implementation of the SESLA, a concept previously presented by the authors for realizing extremely wideband (> 10 : 1) low-profile arrays. Specifically, the feed provides unbalanced to balanced transformation allowing the balance-fed SESLA...

Transmit and receive Ku-band phased array designs are described for testing an airborne sense and avoid radar. The arrays are small with a size of 24 cm x 9 cm and operate from 13 to 17 GHz with electronic scanning from plus of minus 45 degrees in azimuth and plus...

An ultrawideband fixed time-delay steered UHF dipole array antenna has been developed for coverage in the 300 to 450 MHz frequency range for communications or radar applications. The antenna utilizes a parasitically-tuned dipole array for linear polarization and is mounted over a ground plane. Numerical electromagnetic simulations were used to...

An ultrawideband (UWB) cavity-backed resistively loaded planar dipole array antenna has been developed for the 100 to 400 MHz frequency range for ground penetrating radar applications. The antenna has been designed with a 3m aperture to perform surveys of a wide swath of ground from a moving vehicle. The performance...

A stepped notch antenna at Ku-band is developed to provide a thermal heat sink for active arrays. The antenna with forced air cooling provides up to 0.4 degrees C/W of thermal resistance. The antenna integration with a printed circuit board allows for high volume surface mount assembly of active devices.

A technique is presented for determining the directivity of a long, uniform Yagi-Uda antenna. It is shown that the maximum directivity is limited by the propagation constant of the particular antenna structure. The propagation constant can be determined by means of a two-part antenna test fixture with M and M...

In order to avoid self-interference, Simultaneous Transmit And Receive (STAR) systems require low mutual coupling between their respective transmit and receive antennas. This paper discusses the development of an 8-element transmit ring array antenna on a circular ground plane with a raised receive element. When combined with a beamformer that...

An omnidirectional colinear microstrip array antenna is modeled as a ladder network. A formula is derived for the maximum directivity of a series-fed colinear antenna with an infinite number of ladder sections. It is shown that the maximum directivity is asymptotically limited and depends upon the product of the seriece...