Publications

Fiber lasers are well suited to scaling to high average power using beam-combining techniques. For coherent combining, optical phase-noise characterization of a ytterbium fiber amplifier is required to perform a critical evaluation of various approaches to coherent combining. For wavelength beam combining, we demonstrate good beam quality from the combination...

What is believed to be a new concept for the measurement of micrometer-sized particle trajectories in an inlet air stream is introduced. The technique uses a light source and a mask to generate a spatial pattern of light within a volume in space. Particles traverse the illumination volume and elastically...

Cryogenically cooled solid-state lasers promise a revolution in power scalability while maintaining a good beam quality because of significant improvements in efficiency and thermo-optic properties. This is particularly true forYb3+ lasers because of their relatively lowquantum defect and relatively broadband absorption even at cryogenic temperatures. Thermo-optic properties of host materials...

Linear arrays of slab coupled optical waveguide lasers (SCOWL) are ideal sources for beam combining of array elements using techniques such as wavelength beam combining (WBC) and possibly coherent beam combining (CBC). SCOWL array elements have very high brightness, low divergence nearly diffraction limited output beams. Arrays of up to...

Methods for accurately characterizing aerosols are required for detecting biological warfare agents. Currently, fluorescence-based biological agent sensors provide adequate detection sensitivity but suffer from high false-alarm rates. Combining single-particle fluorescence analysis with laser-induced breakdown spectroscopy (LIBS) provides additional discrimination and potentially reduces false-alarm rates. A transportable UV laser-induced fluorescence-cued LIBS...

We report the demonstration of a 1.5 um InGaAsP mode-locked slab-coupled optical waveguide laser (SCOWL) producing 10 ps pulses with energies of 58 pJ and average output powers of 250 mW at a repetition rate of 4.29 GHz. To the best of our knowledge, this is the first passively mode-locked...

Beam combining of laser arrays with high efficiency and good beam quality for power and radiance (brightness) scaling is a long-standing problem in laser technology. Recently, significant progress has been made usingwavelength (spectral) techniques and coherent (phased array) techniques, which has led to the demonstration of beam combining of a...

Coherent solid-state optical sources based on Nd:YAG/Cr4+:YAG passively Q-switched microchip lasers cover the spectral range from 5000 to 200 nm, producing multikilohertz pulse trains with pulse durations as short as 100 ps and peak powers up to 1 MW. The wavelength diversity is achieved through harmonic conversion, parametric conversion, Raman...

Improved and stable blue/UV quantum efficiency has been demonstrated on 2Kx4K imagers using molecular-beam epitaxy to create a thin doped layer on the back surface. Quantum efficiency data on thick (40-50 pm) imagers with single and dual-layer anti-reflection coatings is presented that demonstrates high and broadband response. Measurements of the...

The outputs from an 11-element, linear diode laser array with broad stripes have been beam combined into a single beam with a beam quality of ~20X diffraction limited in the plane of the junction. This beam combining was achieved by use of a common external cavity containing a grating, which...