Publications
Tagged As
Automatic dependent surveillance-broadcast in the Gulf of Mexico
December 1, 2008
Journal Article
Published in:
Lincoln Laboratory Journal, Vol. 17, No. 2, December 2008, pp. 55-69.
Topic:
R&D area:
R&D group:
Summary
The Federal Aviation Administration is adopting Automatic Dependent Surveillance-Broadcast (ADS-B) to provide surveillance in the National Airspace System (NAS). Aircraft separation services are currently provided by a system of en route and terminal radars, and the performance of these radars in part dictates the separation distance required between aircraft. ADS-B is designed to provide comparable service in areas where no radar coverage exists. It will eventually be the primary surveillance source in the NAS, if it is proven to provide performance equal to or better than radar.
Summary
The Federal Aviation Administration is adopting Automatic Dependent Surveillance-Broadcast (ADS-B) to provide surveillance in the National Airspace System (NAS). Aircraft separation services are currently provided by a system of en route and terminal radars, and the performance of these radars in part dictates the separation distance required between aircraft. ADS-B...
READ MORE
Operational usage of the Route Availability Planning Tool during the 2007 convective weather season : executive summary
October 6, 2008
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-339-1
Topic:
R&D area:
R&D group:
Summary
The Route Availability Planning Tool (RAPT) is an integrated weather/air traffic management decision support tool that has been designed to help traffic managers better anticipate weather impacts on jet routes and thus improve NY departure route usage efficiency. A field study was conducted in 2007 to evaluate RAPT technical performance at forecasting route blockage, to assess RAPT operational use during adverse weather, and to evaluate RAPT benefits. The operational test found that RAPT guidance was operationally sound and timely in many circumstances. RAPT applications included increased departure route throughput, more efficient reroute planning, and more timely decision coordination. Estimated annual NY departure delay savings attributed to RAPT in 2007 totaled 2,300 hours, with a cost savings of $7.5 M. The RAPT field study also sought to develop a better understanding of NY traffic flow decision-making during convective weather impacts since the RAPT benefi ts in 2007 were significantly limited by a number of factors other than direct weather impacts. Observations were made of the multi-facility departure management decision chain, the traffic management concerns and responsibilities at specific FAA facilities, and the procedures and pitfalls of the current process for capturing and disseminating key information such as route/fix availability and restrictions.
Summary
The Route Availability Planning Tool (RAPT) is an integrated weather/air traffic management decision support tool that has been designed to help traffic managers better anticipate weather impacts on jet routes and thus improve NY departure route usage efficiency. A field study was conducted in 2007 to evaluate RAPT technical performance...
READ MORE
Operational usage of the Route Availability Planning Tool during the 2007 convective weather season
October 6, 2008
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-339
Topic:
R&D area:
R&D group:
Summary
The Route Availability Planning Tool (RAPT) is an integrated weather/air traffic management decision support tool that has been designed to help traffic managers better anticipate weather impacts on jet routes and thus improve NY departure route usage efficiency. A field study was conducted in 2007 to evaluate RAPT technical performance at forecasting route blockage, to assess RAPT operational use during adverse weather, and to evaluate RAPT benefits. The operational test found that RAPT guidance was operationally sound and timely in many circumstances. RAPT applications included increased departure route throughput, more efficient reroute planning, and more timely decision coordination. Estimated annual NY departure delay savings attributed to RAPT in 2007 totaled 2,300 hours, with a cost savings of $7.5 M. The RAPT field study also sought to develop a better understanding of NY traffic flow decision-making during convective weather impacts since the RAPT benefits in 2007 were significantly limited by a number of factors other than direct weather impacts. Observations were made of the multi-facility departure management decision chain, the traffic management concerns and responsibilities at specific FAA facilities, and the procedures and pitfalls of the current process for capturing and disseminating key information such as route/fix availability and restrictions.
Summary
The Route Availability Planning Tool (RAPT) is an integrated weather/air traffic management decision support tool that has been designed to help traffic managers better anticipate weather impacts on jet routes and thus improve NY departure route usage efficiency. A field study was conducted in 2007 to evaluate RAPT technical performance...
READ MORE
Applications of a macroscopic model for en route sector capacity
August 18, 2008
Conference Paper
Published in:
AIAA Guidance, Navigation and Control Conf. and Exhibit, 18-21 August 2008.
Topic:
R&D area:
Summary
Airspace capacity estimates are important both for airspace design and for operational air traffic management. Considerable effort has gone into understanding the complexity factors that reduce sector capacity by increasing controller workload. Yet no analytical means is available for accurately estimating the maximum capacity of an en route sector. The Monitor Alert Parameter (MAP) values that determine the operational traffic limit of en route sectors in the United States account only for workload from inter-sector coordination tasks. We propose a more complete sector capacity model that also accounts for workload from conflict avoidance and recurring tasks. We use mean closing speeds and airspace separation standards to estimate aircraft conflict rates. We estimate the mean controller service times for all three task types by fitting the model against observed peak traffic counts for hundreds of en route airspace volumes in the Northeastern United States. This macroscopic approach provides numerical capacity predictions that closely bound peak observed traffic densities for those airspace volumes. This paper reviews recent efforts to improve the accuracy of the bound by replacing certain global parameters with measured data from individual sectors. It also compares the model capacity with MAP values for sectors in the New York Center. It concludes by illustrating the use of the model to predict the capacity benefits of proposed technological and operational improvements to the air traffic management system.
Summary
Airspace capacity estimates are important both for airspace design and for operational air traffic management. Considerable effort has gone into understanding the complexity factors that reduce sector capacity by increasing controller workload. Yet no analytical means is available for accurately estimating the maximum capacity of an en route sector. The...
READ MORE
Evaluation of weather impact models in departure management decision support: operational performance of the Route Availability Planning Tool (RAPT) prototype
January 20, 2008
Conference Paper
Published in:
13th Conf. on Aviation, Range and Aerospace Meteorology, ARAM, 20-24 January 2008.
Topic:
R&D area:
R&D group:
Summary
In this paper, the revised RAPT algorithm and display are described and evaluated. The fidelity of the RAPT operational model is assessed by comparing RAPT departure status with observed departure flows (i.e., trajectories, weather avoidance maneuvers and storm penetrations) on several days when convective weather SWAPs were in effect in New York. Real-time in-situ observations at RAPT facilities (described in a companion paper at this conference; Robinson, 2008), user feedback from RAPT playbacks and the REPEAT web site are used to support this post-event evaluation. For example, real time observations provide the time and operational rationale for a specific departure route closure identified in the traffic flow analysis. This information is necessary to identify closures or flow restrictions that are the result of factors outside of the current RAPT algorithm domain (e.g., traffic restrictions due to volume, downstream congestion, etc.). Real time observations are also used to identify specific times when critical, weather-related operational decisions were made. The RAPT guidance at these critical decision points is analyzed to determine if RAPT provided information that enabled (or could have enabled, had it been used) more timely or effective decisions. The effect of forecast uncertainty on RAPT performance is also examined, particularly in convective weather situations where the location, severity and operational impact were difficult to predict. Strategies that mitigated risks associated with forecast uncertainty are presented. These include the use of additional information provided in the RAPT display, such as echo top heights encountered along the departure route, to confirm or modify RAPT guidance and the consideration of the departure status of two or more adjacent routes to 'average out' variations in the departure status timelines.
Summary
In this paper, the revised RAPT algorithm and display are described and evaluated. The fidelity of the RAPT operational model is assessed by comparing RAPT departure status with observed departure flows (i.e., trajectories, weather avoidance maneuvers and storm penetrations) on several days when convective weather SWAPs were in effect in...
READ MORE
The next-generation multimission U.S. surveillance radar network
November 1, 2007
Journal Article
Published in:
Bull. American Meteorological Society, Vol. 88, No. 11, November 2007, pp. 1739-1751.
Summary
Current U.S. weather and aircraft surveillance radar networks vary in age from 10 to more than 40 years. Ongoing sustainment and upgrade programs can keep these operating in the near to mid-term, but the responsible agencies National Weather Service (NWS), Federal Aviation Administration (FAA), and the Departments of Defense (DoD) and Homeland Security (DHS) recognize that large-scale replacement activities must begin during the next decade. The National Weather Radar Testbed (NWRT) in Norman, Oklahoma, is a multiagency project demonstrating operational weather measurements capability enhancements that could be realized using electronically steered phased-array radars as a replacement for the current Weather Surveillance Radar-1988 Doppler (WSR-88D). FAA support for the NWRT and related efforts address air traffic control (ATC) and homeland defense surveillance missions that could be simultaneously accomplished using the agile-beam capability of a phased array weather radar network. In this paper, we discuss technology issues, operational considerations, and cost trades associated with the concept of replacing current national surveillance radars with a single network of multimission phased array radars (MPAR). We begin by describing the current U.S. national weather and aircraft surveillance radar networks and their technical parameters. The airspace coverage and surveillance capabilities of these existing radars provide a starting point for defining requirements for the next-generation airspace surveillance system. We next describe a conceptual MPAR high-level system design and our initial development and testing of critical subsystems. This work, in turn, has provided a solid basis for estimating MPAR costs for comparison with existing, mechanically scanned operational surveillance radars. To assess the numbers of MPARs that would need to be procured, we present a conceptual MPAR network configuration that duplicates airspace coverage provided by current operational radars. Finally, we discuss how the improved surveillance capabilities of MPAR could be utilized to more effectively meet the weather and aircraft surveillance needs of U.S. civil and military agencies.
Summary
Current U.S. weather and aircraft surveillance radar networks vary in age from 10 to more than 40 years. Ongoing sustainment and upgrade programs can keep these operating in the near to mid-term, but the responsible agencies National Weather Service (NWS), Federal Aviation Administration (FAA), and the Departments of Defense (DoD)...
READ MORE
Model estimates of traffic reduction in storm impacted en route airspace
September 18, 2007
Conference Paper
Published in:
7th AIAA Aviation Technology, Integration, and Operations (ATIO) Conf., 18-20 September 2007.
Topic:
R&D area:
R&D group:
Summary
An understanding of convective weather impacts on en route airspace capacity is a first step toward development of predictive tools to support both tactical and strategic routing decisions in storm-impacted airspace. This study presents a model for traffic reductions in en route sectors that result from convective weather impacts. A model to predict the impact of convective weather on en route traffic, Traffic Normalized Fractional Route Availability (TNFRA), combines Weather Avoidance Fields (WAF) from the Convective Weather Avoidance Model (CWAM) with a model for route usage in air traffic control (ATC) sectors. The model estimates the number of flights that will be able to pass through convective weather in a given sector. Results show that TNFRA provides a relatively unbiased estimate of sector traffic when compared to actual operations during high impact - convective weather events.
Summary
An understanding of convective weather impacts on en route airspace capacity is a first step toward development of predictive tools to support both tactical and strategic routing decisions in storm-impacted airspace. This study presents a model for traffic reductions in en route sectors that result from convective weather impacts. A...
READ MORE
Analysis of ground surveillance assets to support Global Hawk airspace access at Beale Air Force Base
August 10, 2007
Project Report
Published in:
Project Report ATC-335, MIT Lincoln Laboratory
Topic:
R&D area:
Summary
This study, performed from May 2006 to January 2007 by MIT Lincoln Laboratory, investigated the feasibility of providing ground-sensor-based traffic data directly to Global Hawk operators at Beale AFB. The system concept involves detecting and producing tracks for all cooperative (transponder-equipped) and non-cooperative aircraft from the surface to 18,000 ft MSL, extending from the Beale AFB Class C airspace cylinder northward to the China Military Operations Area (MOA). Data from multiple sensors can be fused together to create a comprehensive air surveillance picture, with the altitudes of non-cooperative targets estimated by fusing returns from all available sensor data. Such a capability, if accepted by the FAA, could mitigate the need for Temporary Flight Restrictions (TFR) to satisfy Certificate of Waiver or Authorization (COA) requirements. There are no existing specifications for ground-sensor-based Unmanned Aerial Systems (UAS) traffic avoidance procedures, nor is it yet known how precisely altitude needs to be estimated. It may be possible to avoid traffic laterally, in which case traffic altitude need not be known accurately. If, however, it is necessary to also avoid traffic vertically, then altitudes will need to be estimated to some (as yet undefined) level of accuracy.
Summary
This study, performed from May 2006 to January 2007 by MIT Lincoln Laboratory, investigated the feasibility of providing ground-sensor-based traffic data directly to Global Hawk operators at Beale AFB. The system concept involves detecting and producing tracks for all cooperative (transponder-equipped) and non-cooperative aircraft from the surface to 18,000 ft...
READ MORE
Macroscopic workload model for estimating en route sector capacity
July 2, 2007
Conference Paper
Published in:
USA/Europe ATM Seminar, 2-5 July 2007.
Topic:
R&D area:
Summary
Under ideal weather conditions, each en route sector in an air traffic management (ATM) system has a certain maximum operational traffic density that its controller team can safely handle with nominal traffic flow. We call this the design capacity of the sector. Bad weather and altered flow often reduce sector capacity by increasing controller workload. We refer to sector capacity that is reduced by such conditions as dynamic capacity. When operational conditions cause workload to exceed the capability of a sector's controllers, air traffic managers can respond either by reducing demand or by increasing design capacity. Reducing demand can increase aircraft operating costs and impose delays. Increasing design capacity is usually accomplished by assigning more control resources to the airspace. This increases the cost of ATM. To ensure full utilization of the dynamic capacity and efficient use of the workforce, it is important to accurately characterize the capacity of each sector. Airspace designers often estimate sector capacity using microscopic workload simulations that model each task imposed by each aircraft. However, the complexities of those detailed models limit their real-time operational use, particularly in situations in which sector volumes or flow directions must adapt to changing conditions. To represent design capacity operationally in the United States, traffic flow managers define an acceptable peak traffic count for each sector based on practical experience. These subjective thresholds-while usable in decision-making-do not always reflect the complexity and geometry of the sectors, nor the direction of the traffic flow. We have developed a general macroscopic workload model to quantify the workload impact of traffic density, sector geometry, flow direction, and air-to-air conflict rates. This model provides an objective basis for estimating design capacity. Unlike simulation models, this analytical approach easily extrapolates to new conditions and allows parameter validation by fitting to observed sector traffic counts. The model quantifies coordination and conflict workload as well as observed relationships between sector volume and controller efficiency. The model can support real-time prediction of changes in design capacity when traffic is diverted from nominal routes. It can be used to estimate residual airspace capacity when weather partially blocks a sector. Its ability to identify dominant manual workload factors can also help define the benefits and effectiveness of alternative concepts for automating labor-intensive tasks.
Summary
Under ideal weather conditions, each en route sector in an air traffic management (ATM) system has a certain maximum operational traffic density that its controller team can safely handle with nominal traffic flow. We call this the design capacity of the sector. Bad weather and altered flow often reduce sector...
READ MORE
Air traffic management decision support during convective weather
June 1, 2007
Journal Article
Published in:
Lincoln Laboratory Journal, Vol. 16, No. 2, June 2007, pp. 263-276.
Topic:
R&D area:
R&D group:
Summary
Flight delays caused by thunderstorms are a significant and growing problem for airlines and the flying public. Thunderstorms disrupt the structured, preplanned flight routing and control process that is used to handle dense air traffic streams in congested airspace. Today's coping strategies are developed by traffic flow management (TFM) specialists who interpret weather measurements and forecasts to develop delay and rerouting strategies. The effectiveness of these strategies is limited by the lack of quantitative models for the capacity impacts of thunderstorms, and by the difficulty of developing and executing timely response strategies during rapidly changing convective weather. In this article, we describe initial work to develop more effective response strategies. We first review insights gained during operational testing of a simple but highly effective Route Availability Planning Tool that can significantly reduce convective-weather induced departure delays at congested airports. We then discuss work to develop core technical capabilities and applications that address broader TFM problems, including en route congestion. Objective models for airspace capacity reductions caused by thunderstorms are discussed, as is an associated scheduling algorithm that exploits the capacity estimates to develop broad-area TFM strategies that minimize delay. We conclude by discussing candidate real-time applications and airspace system performance analysis that is enabled by our weather-capacity models and optimal scheduling algorithm.
Summary
Flight delays caused by thunderstorms are a significant and growing problem for airlines and the flying public. Thunderstorms disrupt the structured, preplanned flight routing and control process that is used to handle dense air traffic streams in congested airspace. Today's coping strategies are developed by traffic flow management (TFM) specialists...
READ MORE